Eco-friendly nanoparticles: mechanisms and capacities for efficient removal of heavy metals and phosphate from water using definitive screening design approach.

Can nano-zero-valent iron, synthesized using oak leaf extract, be the key solution for water preservation, efficiently removing heavy metal ions and phosphate anions simultaneously? This research unveils how this technology not only promises high efficiency in the remediation of water resources, but also sets new standards for environmentally friendly processes. The high antioxidant capacity and high phenol content indicate suggest the possibility of oak-nZVI synthesis using oak leaf extract as a stable material with minimal agglomeration. The simultaneous removal of Cd and phosphates, as well as and Ni and phosphates was optimized by a statistically designed experiment with a definitive screening design approach. By defining the key factors with the most significant impact, a more efficient and faster method is achieved, improving the economic sustainability of the research by minimizing the number of experiments while maximizing precision. In terms of significance, four input parameters affecting process productivity were monitored: initial metal concentration (1-9 mg L-1), initial ion concentration (1-9 mg L-1), pH value (2-10), and oak-nZVI dosage (2-16 mL). The process optimization resulted in the highest simultaneous removal efficiency of 98.99 and 87.30% for cadmium and phosphate ions, respectively. The highest efficiency for the simultaneous removal of nickel and phosphate ions was 93.44 and 96.75%, respectively. The optimization process fits within the confidence intervals, which confirms the assumption that the selected regression model well describes the process. In the context of e of the challenges and problems of environmental protection, this work has shown considerable potential and successful application for the simultaneous removal of Cd(II) and Ni(II) in the presence of phosphates from water.

Integrated application of green zero-valent iron and electrokinetic remediation of metal-polluted sediment.

In recent years, more focus has been placed on integrated metal removal processes. Electrokinetic (EK) treatment is superior to other technologies because it can be applied to a variety of mediums. Green nanoparticles, on the other hand, have the potential to significantly reduce pollutant concentrations in a short period of time. In this study, we investigated the possibility of combining green zero-valent iron (nZVI) with EK on Cd and Zn-contaminated sediment. For green synthesis, extracts of dry leaves of mulberry (ML-nZVI) and oak (OL-nZVI) were used, both abundantly present in the Republic of Serbia. The results show that, despite the fact that their availability was greatly reduced, the metals were concentrated and stabilized to a significant extent in the middle of the EK cell (z/L 0.5) after all treatments. When the results were compared, OL-nZVI proved to be a more effective nanomaterial even with smaller doses of OL-nZVI, which is important in terms of achieving better economic benefits. This study identified green nano zero-valent iron as a powerful tool for metal removal when combined with electrokinetic (EK) treatment, which improves green nZVI longevity and migration. This study of the combined green nZVI-EK remediation treatment, in particular, will have an impact on future research in this field, given the achieved efficiency.

"Green" nZVI-Biochar as Fenton Catalyst: Perspective of Closing-the-Loop in Wastewater Treatment.

In the framework of wastewater treatment plants, sewage sludge can be directed to biochar production, which when coupled with an external iron source has the potential to be used as a carbon-iron composite material for treating various organic pollutants in advanced oxidation processes. In this research, "green" synthesized nano zero-valent iron (nZVI) supported on sewage sludge-based biochar (BC)-nZVI-BC was used in the Fenton process for the degradation of the recalcitrant organic molecule. In this way, the circular economy principles were supported within wastewater treatment with immediate loop closing; unlike previous papers, where only the water treatment was assessed, the authors proposed a new approach to wastewater treatment, combining solutions for both water and sludge. The following phases were implemented: synthesis and characterization of nano zero-valent iron supported on sewage sludge-based biochar (nZVI-BC); optimization of organic pollutant removal (Reactive Blue 4 as the model pollutant) by nZVI-BC in the Fenton process, using a Definitive Screening Design (DSD) model; reuse of the obtained Fenton sludge, as an additional catalytic material, under previously optimized conditions; and assessment of the exhausted Fenton sludge's ability to be used as a source of nutrients. nZVI-BC was used in the Fenton treatment for the degradation of Reactive Blue 4-a model substance containing a complex and stable anthraquinone structure. The DSD model proposes a high dye-removal efficiency of 95.02% under the following optimal conditions: [RB4] = 50 mg/L, [nZVI] = 200 mg/L, [H2O2] = 10 mM. pH correction was not performed (pH = 3.2). Afterwards, the remaining Fenton sludge, which was thermally treated (named FStreated), was applied as a heterogeneous catalyst under the same optimal conditions with a near-complete organic molecule degradation (99.56% ± 0.15). It could be clearly noticed that the cumulative amount of released nutrients significantly increased with the number of leaching experiments. The highest cumulative amounts of released K, Ca, Mg, Na, and P were therefore observed at the fifth leaching cycle (6.40, 1.66, 1.12, 0.62, 0.48 and 58.2 mg/g, respectively). According to the nutrient release and toxic metal content, FStreated proved to be viable for agricultural applications; these findings illustrated that the "green" synthesis of nZVI-BC not only provides innovative and efficient Fenton catalysts, but also constitutes a novel approach for the utilization of sewage sludge, supporting overall process sustainability.

Distribution and ecological risk assessment of organic and inorganic pollutants in the sediments of the transnational Begej canal (Serbia-Romania).

This research is designed to determine the level and types of pollution in the highly contaminated sediments of the international Begej canal in Timis district, Romania and north-eastern Serbia. The cross-border canal stretch investigated is currently not navigable, but represents an important waterway between the Danube River in Serbia and the city of Timisoara. Surface sediments were monitored annually from 2008 to 2016 at 36 representative sampling locations, with a wide range of analyses, including eight heavy metals of long-term monitoring concern (Ni, Zn, Cd, Cr, Cu, Pb, As and Hg) and the 16 USEPA PAHs. The purpose of this study was to determine the diversity and impact of anthropogenic and natural sources of pollution at the pollution hot spots on the canal: at the Itebej lock (near the border with Romania) and downstream at the Klek lock. Sediment quality and ecological risk were assessed in order to determine pollutants of concern. Several multi-proxies were applied (e.g. geo-accumulation index (Igeo), ecological risk index (RI) and total benzo[a]pyrene equivalent (B[a]Peq)). To determine and predict trends, multivariate statistical methods (factor analysis of principal component analysis (PCA/FA)) were carried out on the organic and inorganic parameters analysed. In the near-border region, acute and significant ecological impacts were observed. The heavy metals Hg, Cr, Pb, Cu and Zn, and the carcinogenic PAH dibenzo[a,h]anthracene, were historically the most frequently detected harmful substances to biota in this and the wider Pannonia region. This is the first long-term study to quantify and derivate the most frequently detected harmful substances of concern for this and similar sites in the wider region, and is additionally supported by significant national and similar environmental data from previous studies in the region.